Product Introduction
KLF-XG160 Through-shaft rotary tiller/ beater transmission gearbox
This product is used in the main transmission gearbox of through-shaft rotary tillers and beaters. It is derived from European and American design concepts. The main transmission box drives the side box and drives the cutter shaft to rotate to achieve plowing operations. Split welded pipe and half shaft structure. It achieves the advantages of easy replacement and maintenance, and the design is not limited by disadvantages such as length. The flange end on one side uses imported maintenance-free bearings for a longer service life. The transmission half shaft is wrapped in a welded pipe, which is safer to use and has a more beautiful design.
Product Advantage
Euro-American Design Heritage for Stable Performance
Adopting proven European and American design concepts, the KLF-XG160 transmission gearbox boasts exceptional structural reliability. It integrates mature engineering principles, with a transmission efficiency of up to 95%, ensuring consistent power output for through-shaft rotary tillers and beaters in long-term operations. The design effectively reduces operational failures, with a fault rate lower than 1.2% under continuous working conditions.
Split Welded Pipe & Half Shaft Structure for Easy Maintenance
Equipped with a split welded pipe and half shaft structure, the gearbox breaks the limitation of length constraints in design. This structure enables quick disassembly and replacement of parts, reducing maintenance time by over 40% compared to integrated structures, and greatly lowering the post-use cost for users.
Precise Power Transmission for Efficient Plowing
The main transmission box drives the side box and cutter shaft to rotate stably, realizing efficient plowing operations. It matches with through-shaft rotary tillers and beaters perfectly, with a rotating speed error of less than 2%, ensuring uniform plowing depth. It is suitable for various soil types, effectively improving farmland preparation quality.
Technical Parameters
Product Uses
Application Scenarios
Dry Land Farmland Preparation
Suitable for through-shaft rotary tillers/beaters in dry fields. It drives the cutter shaft stably to plow soil, adapting to various dry soil types with precise power transmission, ensuring uniform plowing depth for subsequent sowing.
Wetland & Muddy Field Operations
With anti-rust welded pipe and durable bearings, it resists moisture corrosion. The split structure allows quick maintenance even in muddy environments, avoiding downtime delays.
Large-Scale Farm Management
Matches large through-shaft equipment, relying on Euro-American design for stable long-term operation. It supports efficient plowing of large plots, reducing fault risks in continuous work.
Hilly Terrain Farming
The wrapped transmission half shaft ensures safety on uneven slopes. Imported bearings maintain stable power output, adapting to fluctuating working conditions in hilly areas.
Cash Crop Planting Bases
Ideal for precise soil preparation of cash crops. Uniform plowing protects soil structure, and easy maintenance minimizes operational interruptions, ensuring timely planting.
Product Operate Guide
To ensure efficient and safe operation across various scenarios, please follow these guidelines:
Pre-Operation
Before work, inspect all connections, especially the split welded pipe joints and half shafts. Ensure bolts are tight and gearbox is properly lubricated.
Scenario-Based Settings
Select appropriate tractor PTO speed and gearbox setting based on your field condition (e.g., dry land, wetland, or hilly terrain). Avoid overloading in particularly hard or muddy soil.
In-Field Operation
Start at a low speed to allow stable engagement. Maintain a consistent forward speed to achieve uniform plowing depth. For continuous large-scale operation, periodically stop to check for overheating or abnormal noise.
Post-Use Care
After use, especially in wet or muddy conditions, clean the exterior thoroughly to prevent corrosion. Regularly inspect the split structure for any wear or debris accumulation.
FAQ
Q1:Are you trading company or manufacturer?
A : We are manufacturer with more than 20 years production and technology experiences.
Q2:Can you supply the sample?
A :After confirmation, you can order samples to check the quality. We will charge the sample cost.
Q3:What is your payment terms?
A:T/T 30% as deposit, 70% balance before shipment.
Q4:How long is your delivery time?
A :Generally ship out within 40-50days after receive order and deposit. The time may vary depending on the product and the level of customization.
